Base — Included in Every Booking
Ceramic Exterior Coating
Full preparation + 9yr Kovalent graphene ceramic · Manufacturer warranty included
Six deliberate steps — every one exists because skipping it compromises the result. This is a complete, sequenced process from raw decontamination through to a fully corrected, professionally coated finish. Not a coating sprayed over a dirty car.
- Iron fallout removal, chemical decon wash, full clay bar treatment — every panel, arch, and door jamb stripped to a contamination-free surface
- Enclosed climate-controlled studio — all stages, no exceptions — nothing settles on a prepared panel mid-process. Mobile detailers cannot offer this.
- Multi-stage paint correction under studio lighting — every panel inspected at microscopic level, all swirls and defects corrected before coating is applied. Ceramic locks them in permanently if skipped.
- IPA panel wipedown — strips all polish oils so the coating bonds to raw, clean paint
- Kovalent 9yr graphene ceramic — applied panel by panel with correct flash times — graphene outperforms standard SiO₂ on water contact angle, heat dissipation, scratch resistance, anti-static, and gloss depth. Manufacturer warranty included.
- Controlled cure + panel-by-panel inspection under studio lighting — the car does not leave until it passes our inspection
- Premium aftercare kit + full briefing with Ricky — correct products, correct technique, everything to protect the investment for its full lifespan
On paint correction: Ceramic is semi-permanent. A swirl under a coating is a swirl you look at every time the sun hits the car — for the life of the coating. There is no other responsible way to do this job.
Add-Ons — Select What Your Car Needs
Wheel & Glass Protection
Heat-grade alloy ceramic + hydrophobic treatment on all exterior glass
Wheels and glass face conditions paint ceramics aren't formulated for — brake heat cycling, acidic fallout, and mechanical stress. Dedicated chemistry for each surface.
- Full wheel decontamination — faces, spokes, barrels, inner rims, all four wheels — bonded brake dust and iron fallout fully removed before any coating contact
- High-temperature wheel ceramic — withstands brake heat cycles, repels brake dust bonding, resists the acid cleaners standard ceramics cannot survive
- Hydrophobic glass ceramic on all exterior glass — rain beads and sheets off at driving speed, optical clarity maintained, UV filtered
- Dramatically reduced maintenance — brake dust no longer bonds, glass contamination no longer sticks
At 70km/h+ rain on a coated windscreen clears without wipers. At night in wet conditions coated glass maintains clarity where bare glass scatters light. That is a safety benefit, not aesthetic.
Interior Protection
Ceramic leather coating + nano-fibre fabric and alcantara treatment
UV exposure, body oil transfer, and spills degrade your interior faster and more permanently than your exterior. An invisible barrier across every surface before the damage becomes irreversible.
- Full interior detail and surface preparation — every surface cleaned and degreased before any protection is applied
- Ceramic leather coating — bonds into the leather grain, UV-stable, stain-resistant, prevents cracking, maintains the natural feel
- Nano-fibre protection — seats, carpet, floor mats — coats each individual fibre, hydrophobic barrier without altering texture or breathability
- Alcantara and suede treatment — specialist product for the material
- Door cards, headlining, pillars — treated across all applicable surfaces
Alcantara stains in seconds and costs thousands to replace. Prevention is always cheaper than restoration.
Window Tinting
Nano-ceramic film only · Studio installed · NSW compliant
Installed entirely inside our enclosed studio. Premium nano-ceramic film exclusively — not dyed film that fades and bubbles, not metallic film that kills your electronics.
- NSW VLT compliance confirmed before anything is touched — correct light transmission for your vehicle and each specific window position
- Full glass clean and prep — all contamination removed before installation begins
- Studio installation — enclosed, dust-free — dust during the wet phase becomes a permanent bubble. There is no fix short of full reinstall. Our studio prevents it.
- Nano-ceramic film — genuine IR heat rejection, 99% UV block, no signal interference — colour-stable and scratch-resistant. Built to last.
On a 35°C Sydney day the measurable cabin temperature difference between ceramic and cheap dyed film is 8–12 degrees. Dyed film goes purple and bubbles within 18 months. We do not install it.
Partial Paint Protection Film
High-impact zones — bonnet, bumper, mirrors, A-pillars, leading edges
Physical impact protection on the zones that take the most damage — without full vehicle coverage. Applied over ceramic for dual-layer protection. For full-body PPF, see the Paint Protection Film tab above.
- Full decontamination and IPA prep on every panel — no film goes onto unprepared paint
- Computer-cut precision patterns to your exact vehicle model — no hand-cutting on paint, no razor blades near the clear coat
- Studio wet installation — dust-free — dust during the wet phase is permanent. Our studio prevents it.
- Edge heat-sealing on every film edge — heat-shrunk and pressed around panel curves, preventing lifting for the film's full lifespan
- Self-healing top coat — light scratches disappear with heat exposure
- Ceramic applied over PPF — hydrophobic and UV protection on top of physical impact protection
- Common zones: full bonnet, front bumper, both mirrors, A-pillars, door leading edges, headlights
Everything is custom quoted
We assess your vehicle, paint condition, and what you're looking for before we price anything. Anyone quoting flat rates without seeing your car is guessing — and the lowest guess always cuts corners.
What Paint Protection Film Is
PPF physically absorbs what ceramic cannot — stone chips, road debris, car park contact, and light scratching. Self-healing with heat. Invisible when installed correctly. Removable after 10+ years without damaging the paint underneath. When ceramic is applied over it, your vehicle has complete dual-layer protection: physical impact absorbed by the film, UV and chemical protection delivered by the ceramic above.
Installation Process
- Full decontamination on every PPF panel — decontaminated, IPA-wiped, and edge-cleaned before any film contact
- Panel edge and shut-line cleaning — every edge, headlight surround, and shut line cleaned specifically. Moisture or contamination here is trapped permanently.
- Computer-precision pattern cutting to your exact vehicle model — no hand-cutting on paint, no razor blades near the clear coat
- Wet installation inside our enclosed, dust-free studio — dust during the wet phase becomes a permanent inclusion. Our studio eliminates this.
- Edge heat-sealing on every panel — film edges heat-shrunk and pressed around panel curves to final adhesion, inspected under lighting before proceeding
- Controlled cure inside the studio — temperature and humidity managed throughout
- Panel-by-panel inspection under studio lighting before release — alignment, optical clarity, edge adhesion, ceramic uniformity all verified
What the Film Does
- Absorbs stone chips and road debris — impacts that would reach your clear coat are stopped at the film
- Self-healing top coat — light scratches disappear with heat. Direct sunlight in summer is sufficient. Paint beneath is completely untouched.
- Invisible on correctly installed panels — you should not be able to see the film on the car
- UV protection — filters UV to protect the paint beneath from fade and oxidisation
- Chemical and contaminant resistance — bird drop etching, industrial fallout, and road tar stopped at the film surface
- Removable without paint damage after 10+ years — the film absorbed a decade of damage. The paint underneath is in the same condition as the day the film went on.
Ceramic Coating Over PPF — Always Included
- Dedicated ceramic applied over the film surface — formulated for PPF application, not standard paint ceramic
- Hydrophobic self-cleaning surface — water sheets off, contamination doesn't bond, washing the PPF is effortless
- Prevents film surface dulling — PPF without ceramic accumulates contamination and dulls. Ceramic maintains optical clarity for the life of the film.
- Extends film lifespan significantly — protecting the PPF surface itself adds years to its working life
The result: Stone chips and physical damage absorbed by the film. UV, chemical, and contamination protection delivered by the ceramic above it. Both systems active on every covered panel.
Coverage Options
- Full bonnet
- Front bumper
- Both side mirrors
- A-pillars
- Door leading edges
- Headlights and fog lights
- Full doors
- Roof
- Rear bumper
- Full vehicle — every painted panel covered
Coverage confirmed with you before quoting. We recommend what makes sense for your vehicle and how you drive it — not the most expensive option.
Everything is custom quoted
We need to see your vehicle and understand the coverage you want before we price anything. Tell us about your car and we'll come back with an accurate quote.